UFOBUILDER

donations welcome

2012-02-09T17:42:00.001-08:00

RICHARD HEENE JOHNS UFO PROJECT

2009-10-20T11:00:00.000-07:00

John,
>
> I emailed a company that sells large foil to find out how wide and what
guages
> they sell. We can use aluminum tape to mend it. I like your idea about using
> helium.
> Foil
> http://www.republicfoil.com/products.htm
>
> 2.5 million volts
> http://www.stungunscheaper.com/~Stun_Guns.php?ref=nstsgtop
>
> We can buy 4 2.5 million volts and use a remote control. I think we can make
it
> 10 feet in a circle.
>
> Do you think this will work?
> Richard

RICHARD HEENE JOHNS UFO PROJECT

2009-10-20T10:51:00.001-07:00

We build
a flying saucer in my garage.

I am under a one year agreement with RDF media from Wife Swap, so I will have
to pitch the show ideas to them. After all they have been paying us well.

I look forward to hearing from you.

RICHARD HEENE JOHNS UFO PROJECT

2009-10-20T10:50:00.001-07:00

Hi John,

We signed the contract for our series. They are now pitching us.

Would you be able to come to Colorado to set up a levitation experiment? If so, let me know when, and what you would need for equipment.

I will email them that I wrote to you and that you may be available.

Thanks,

Richard

RICHARD HEENE JOHNS UFO PROJECT

2009-10-20T10:47:00.001-07:00

Date: Sunday, November 9, 2008, 7:40 AM

Damn that we a very good explanation! If he could apply some production value,
he could go commercial with it.

Today I hope to levitate the saucer. I'll let you know how it goes. I will
shoot some video and send it to you and Anthony.

You and I really need to work together on some of these projects I have.

I'll write you after we
finish.

Richard

-----Original Message-----

RICHARD HEENE JOHNS UFO PROJECT

2009-10-20T10:45:00.000-07:00

I will be placing the final skin on the outer portion of the saucer. I should be getting a 50kv supply delivered by Tues or Wed. I will be able to ask the production on Sunday if you can come down here for the event.

bur own ufo

2008-08-06T19:38:00.000-07:00

LOOK LIKE A POND TYPE THING WHEN HARD NEXT THING IS A PIECE OF ALMOST FOIL ALUMINIUM 3 TIN CANS THICK OVER COVERINF THE MOLD IN THE BACK YARD WITH A HAND TYPE UNIT OF GREASED WOOD BALL SHAPED AT 6 INCHS DIAMETER SLOWLYING STARTING IN THE CENTER HAND SPING THE ALUMINIUM TO OUTWARD UNTILL IN TIME IT TAKES ITS SHAPE OF A UFO MAYBE A WOODEN JIG COULD BE MADE TO DO THIS ALSO THE BOTTOM THE SAME THE LARGER IT IS THE MORE LIFT JOINT TE TWO UNITS TOGETHER BY SIMPLY WELD BOND GLUE AT 2 INCHS OUT SIDE LIP THEN PUTTINF A SMALL ALUMINIUM VALVE UNDERNEATH IT THE UFO PRESSURERISE IT WITH HELIUM GIFEING IT THE POP CAN EFFECT ITS VERY HARD TO CRUSH A POP CAN UNDER PRESSURE BUT NO A GREAT PRESSURE LEAVEING A TINY HALF INCH LIP AROUND THE ENTIRE UFO SO TO ACT ALSO WITH LIFTER ASSISTANCE VERY FEASABLE ONE WOULD ALSO BEFORE PUTTING IT TOGHETHER THIN ALUMINIUM 1/8 THICK RODS OR WIRE FROM CENTER TO BOTTOM INSIDE AS WELL AS SIX INSIDE TO WHERE THE UFO BULGE OR TOP SECTION WELD BONDED AS EACH WIRE WOULD HAVE A 4 SQUARE INCH 1/16TH PLATE ON EACH END FOR WELD BOND J.B WELD WOULD DO IT THIS IS DONE TO KEEP THE UFO SHAPE WHILE PRESSURE FROM HELIUM HYDROGEN WOULD HAVE DOUBLE LIFT ENERGY BUT WOULD BLOW UP THE LARGER THE SAUCER THE MORE LIFT IF NEEDED A WEATHER BALLON INSIDE OR SMALL ONES TO TAKE UP ALL THE SPACES INSIDE THE UFO IF LIFT IS GREAT THEN A BATTERY POWERED HIGH VOLTAGE UNIT RADIO CONTROLLED GIVEN TAKING VOLTAGE SO WE CAN CONTROL AS WELL AS FOCUS THE HIGH DC VOLTAGE ANOTHER HARD TYPE MODEL COULD BE MADE TO WALK INSIDE IT BUT IDENTICLE OTHER FUN THINGS SILVER MYLARE TYPE UFO NEED TO FIND A MYLARE FACTORY OR WORK OUT A CUTTING PATTERN LIKE CLOTHING THIS ALSO WOULD HAVE HELIUM AND A RF CONTROLED HIGH VOLTAGE CAN WE GET IT TO 12 OR 24 FEET IN DIAMETER ? WITH MYLAR YES ALUMINIUM YES SPECIAL JIGS I THINK OF